Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Garage Door Installation Cost in Centennial?
Garage door installation in Centennial typically costs $700 to $2,200 for a new door, and that range covers the door, hardware, and the labor to hang and adjust it. A basic single-car steel door sits near the bottom of that range. A double-car door with insulation and a window row sits near the top. Opener installation, if you’re adding one, runs $250 to $550 on its own. These are estimated ranges for the Centennial market, and the written estimate you get before we start is what sets the final price.
Garage Door Installation Cost Breakdown (2026)
Here’s how the numbers break out. Every figure below is a typical estimated range, not a firm quote. Your door’s size, the material you pick, and the condition of the opening all move the final number, and you’ll see the real total in writing before any work begins.
| Work | Typical Estimated Range |
|---|---|
| New door installation (single car) | $700 – $1,400 |
| New door installation (double car) | $1,200 – $2,200 |
| Opener installation | $250 – $550 |
| Panel replacement (replacing damaged sections instead of the whole door) | $250 – $500 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| Full repair job (varies by what’s failing) | $150 – $600 |
Two things push installation toward the top of that $700 to $2,200 range: the door itself and the shape of your opening. A wider or taller opening means more material, heavier springs, and sometimes a torsion system instead of extension springs. Roll-up doors on a shop building cost less than a carriage-style door on a front-facing two-car garage. Insulated doors cost more than non-insulated, and windows add material and labor. On the lower end, a stock-size single steel door on a clean, standard opening is the simplest job there is.
If your existing door is mostly sound and only a section is damaged, a panel replacement at $250 to $500 can be the smarter call than a full install. We’ll tell you honestly which one makes sense for your door rather than upselling a replacement you don’t need.
What Affects Garage Door Installation Pricing in Centennial
Centennial sits along the Front Range south of Denver, and that location shapes garage door work in ways you might not expect. Cold snaps, dry air, and big temperature swings between seasons all put stress on doors, springs, and openers. Here are the factors that move your installation price, and a few that point to why the door you choose matters as much in Centennial as it does anywhere.
- Door size and material. A single-car door at a standard width costs less than a double-car door. Steel is the most affordable common option, aluminum and wood cost more, and the material you pick also affects how much upkeep the door needs in Colorado’s dry climate and freeze-thaw swings.
- Insulation and windows. An insulated door holds more warmth in a garage that shares a wall with the house, which matters on cold Centennial nights. Windows add cost, but they also add weight, so the spring system has to be sized for the final door, not a lighter one.
- Opener compatibility. If you’re keeping your current opener, it has to be able to lift the new door’s weight and work with the door’s safety sensors. If you’re replacing both, that’s where the $250 to $550 opener installation range comes in. We work on LiftMaster, Chamberlain, Genie, and Craftsman openers, among others, so we can match a new door to what you already own or set you up with a fresh system.
- Condition of the opening and tracks. A clean, plumb opening with straight tracks installs faster. A bent track or a sagging header means realignment work before the new door goes up, adding $120 to $240 if the tracks need attention.
- Brand and tier. Entry-level doors and premium doors differ in price and in how they’re built. We work across Clopay, Amarr, Wayne Dalton, and Raynor, so we can walk you through what each brand offers at each price point instead of steering you toward a single product line.
- Permits. Some cities require a permit for a garage door replacement. If you’re not sure whether Centennial does, ask the city’s building department before you schedule the install, and factor any permit cost into your budget.
Should You Replace the Door or Repair It?
Repair is usually the better value when the door’s structure is sound and only one component has failed. Replacement makes more sense when the door is dented across multiple sections, the panels are rusted through, or the door is so old that parts are hard to source. A single damaged panel at $250 to $500 is far cheaper than a new door at $700 to $2,200. A full repair job at $150 to $600 covers most single-issue fixes. When you call, we’ll look at the door and tell you straight which way makes sense, and the free estimate means there’s no cost to find out.
What’s Included in a Garage Door Installation?
A full installation includes the door panels, the track system, the springs, the rollers, the hinges, and the hardware, all assembled and adjusted on your opening. We check that the door balances correctly, that it closes flush with the floor, and that the safety sensors on the opener are lined up and working. If you’re adding an opener at the same time, we’ll wire and program it, then test the auto-reverse feature. What’s not included is any repair work the opening needs before the new door goes on, and that’s part of what the estimate covers. We’ll flag anything that needs fixing first so there are no surprises on install day.
How Long Does a Garage Door Installation Take?
Most residential installations take a few hours, and a straightforward single-door swap can finish in one visit. A double door with opener wiring may run longer. The bigger variable is whether your opening needs prep work, like straightening tracks or adjusting the header. We’ll give you a realistic time window when you book, and since our dispatch runs from 7am to 7pm, Sunday through Friday, we can schedule the job around your day. We’re closed Saturdays.
How to Save on Garage Door Installation
There’s no trick to getting a fair price on an install, but there are ways to keep the total down without cutting corners on the things that matter.
- Get a free written estimate first. A written estimate locks in the number before work starts, so you can compare options side by side. Call (844) 834-3842 and we’ll set one up.
- Repair instead of replace where it makes sense. A panel replacement at $250 to $500 beats a full door at $700 to $2,200 if the rest of the door is solid.
- Keep your existing opener if it’s still working. Skip the $250 to $550 opener install if your current unit can handle the new door’s weight. We’ll test it before you decide.
- Choose a stock size and a standard material. Custom sizes and premium materials add cost. A standard steel door at a common width is the most affordable path.
- Fix minor track and roller issues during installation. It’s cheaper to realign tracks at $120 to $240 or swap rollers at $110 to $220 while the installer is already there than to call back later.
Why Choose Lockhart for Garage Door Installation in Centennial
Garage doors are all we do. We repair them, we diagnose and fix the openers, and we install new ones, so you’re not bouncing between a door company, an opener specialist, and a handyman. That matters when a job crosses lines, like a new door that needs the opener reprogrammed or a track that needs straightening before the door goes up. We work on the eight brands most commonly installed in homes across the area: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Whatever’s on your house now, we’ll recognize it and know how to work with it. Our technicians have up to 9 years of experience, and a free estimate means you get a real number before you commit.
If you’re planning an installation and want to understand the full scope of what we handle, take a look at our Lockhart Garage Door Service page. And if you’re wondering how the weather and housing around Centennial affect your door, we’re happy to talk it through.
FAQs – Garage Door Installation Cost
How much does a new garage door cost in Centennial?
A new garage door in Centennial typically costs $700 to $2,200 installed, depending on size, material, and whether you add insulation or windows. A single-car steel door sits near $700 to $1,400, while a double-car door with upgrades runs toward the top of the range. Call (844) 834-3842 for a free estimate and we’ll give you an exact number for your opening.
Is it cheaper to repair or replace a garage door?
Repair is usually cheaper. A single panel replacement is $250 to $500, and most single-issue repairs fall in the $150 to $600 range, both well under a full install at $700 to $2,200. Replacement only makes sense when the door is damaged across multiple sections or too old to source parts for. Call (844) 834-3842 and we’ll tell you which way to go, free.
How much does opener installation cost in Centennial?
Opener installation in Centennial typically costs $250 to $550, and that includes wiring and programming the unit plus testing the safety sensors. It’s often cheaper to add an opener at the same time as a new door so it’s one visit. Call (844) 834-3842 for a free quote on your opener.
Can you install a garage door the same day?
Same-day installation is possible on a stock door and a standard opening, though most installs are scheduled ahead so the door you want is on hand. We answer 24/7, and dispatch runs from 7am to 7pm, Sunday through Friday. Call (844) 834-3842 to check availability for your door.
Do I need a permit to install a garage door in Centennial?
Some cities require a permit for a garage door replacement, and whether Centennial does is a question for the city’s building department. Ask them before you schedule. It’s a quick call and it settles the question for your address. Call (844) 834-3842 to book your install once you have the answer.
Contact Lockhart Garage Door Service
Whether you’re replacing a worn-out door or adding an opener to a new one, a free estimate is the fastest way to know where you stand. Call (844) 834-3842. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We work on your brand, whether it’s LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, or Raynor, and we stand behind the work we do. Get your free estimate today and let’s get your door sorted.
Pricing reflects the Centennial market as of 2026. Lockhart Garage Door Service offers free estimates – call (844) 834-3842.
What Our Customers Say
"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Roger Bennett"Opener kept reversing halfway down. Turned out to be the safety sensors knocked out of alignment by a bicycle. He straightened them, wouldn't charge me for it, and just asked me to keep them in mind if I need real work later."
- Matt Barrett"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- David Kim